To program your TV...
1. Turn on your TV
2. Press [TV], then [SELECT] together - hold both buttons down until the indicator light illuminates.
3. a. Press and hold [CH] until your TV turns off. As soon as your TV turns off, release [CH]
OR
b. From the TV Setup Code list, locate and enter a 3-digit code for your brand. If multiple codes are listed, you may have to enter several 3-digit codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press [TV] to lock in the code. The indictaor light will blink and go out.
If your TV does not turn back on, repeat steps 3 and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both
buttons down until the indicator light illuminates.
3. a. Press and hold [CH ] until your TV turns off.
As soon as your TV turns off, release [CH ].
OR
b. From the TV Setup Code list, locate and enter a
3-digit code for your brand. If multiple codes are
listed, you may have to enter several 3-digit
codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press
[TV] to lock in the code. The indicator light will
blink and go out.
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both
buttons down until the indicator light illuminates.
3. a. Press and hold [CH ] until your TV turns off.
As soon as your TV turns off, release [CH ].
OR
b. From the TV Setup Code list, locate and enter a
3-digit code for your brand. If multiple codes are
listed, you may have to enter several 3-digit
codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press
[TV] to lock in the code. The indicator light will
blink and go out.
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both
buttons down until the indicator light illuminates.
3. a. Press and hold [CH ] until your TV turns off.
As soon as your TV turns off, release [CH ].
OR
b. From the TV Setup Code list, locate and enter a
3-digit code for your brand. If multiple codes are
listed, you may have to enter several 3-digit
codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press
[TV] to lock in the code. The indicator light will
blink and go out.
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both
buttons down until the indicator light illuminates.
3. a. Press and hold [CH ] until your TV turns off.
As soon as your TV turns off, release [CH ].
OR
b. From the TV Setup Code list, locate and enter a
3-digit code for your brand. If multiple codes are
listed, you may have to enter several 3-digit
codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press
[TV] to lock in the code. The indicator light will
blink and go out.
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

To program (setup) your TV...
1. Turn on your TV.
2. Press [DEVICE], then [MUTE] together – hold both buttons down until the lighted mode buttons start blinking in sequence.
3. Press [TV]. The [TV] button lights up.
4. a. Press and hold [CH ] until your TV turns off. As soon as your TV turns off, release [CH ].
OR
4. b. From the TV Setup Code list, locate and enter the 3-digit code until your TV turns off. If multiple codes are listed, you may have to enter several 3-digit codes until your TV turns off.
5. Press [MUTE]. If your TV turns back on, press [TV] to lock in the code. The [TV] button will blink and go out.
If your TV does not turn back on, repeat steps 4 and 5 until you can turn your TV off and on.

click here for a complete listing of instructions

Code Entry Programming:
1. Turn on all the electronic devices (TV, VCR, DVD, Audio) you want to porgram the remote to operate.
2. Press [SELECT], then [MUTE] together until the power/mode buttons illuminate in a slow-rotation (ie. CBL->TV->VCR...).
3. A. To program your TV, locate the 3-digit code for your brand and enter it on the keypad of the remote. Entry of the correct code will cause your TV to turn off. If multiple codes are listed for your brand, you may have to try several different codes until your TV turns off.
B. As soon as you have entered a 3-digit code that turns your TV off, press [MUTE].
1. If the TV turns back on, press [SELECT] to lock in the code. The power/mode buttons will blink 3 times and go out.
-OR-
2. If the TV doesn't turn back on, enter a different 3-digit code until your TV turns back on. Then press the [SELECT] button to lock in the code. The power/mode buttons will blink 3-times and go out.
4. To program your other devices, reference the proper codes and repeat steps 2 and 3 above.

Set up for TV
1. Turn on TV.
2. Point the BR-350 away from the TV.
3. Press and hold TV and Select at the same time until the light blinks twice.
4. Enter the three-digit code. Indicator light blinks twice.
5. Point the BR-350 toward the TV.
6. Press TV. Did the TV turn off?
Yes - Setup complete.
No - Try setup again starting from step 2. Using the next code listed for the brand.

click here for a complete listing of instructions

To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both buttons down until the indicator light illuminates.
3 a. Press and hold [CH] until your TV turns off. As soon as your TV turns off, release [CH].
OR
b. From the TV Setup Code list, locate and enter a 3-digit code for your brand. If multiple codes are listed, you may have to enter several 3-digit codes until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press [TV] to lock in the code. The indicator light will blink 2 times and go out.
If your TV does not turn back on, repeat steps 3 and 4 until you can turn your TV off and on.

click here for a complete listing of instructions

Setup for TV
1. Turn on the TV.
2. Press and hold SETUP. The indicator light comes on. Keep holding until the light goes off.
3. Release SETUP. The indicator light blinks once.
4. Press TV.
5. Enter the three-digit code. Indicator light blinks twice to confirm acceptance.
6. Point the BR-360 toward the TV.
7. Press TV. Did the TV turn off?
Yes - Setup complete.
No - Try setup again starting from step 2, using the next code listed for the brand.

click here for a complete listing of instructions

Setup for TV
1. Turn on your TV.
2. Point the remote away from the cable set-top device, TV, and VCR.
3. Press and hold SELECT and TV until the light blinks twice.
4. Enter the setup code for your TV. The light on the remote shuld blink twice. IF not, try another setup code.
5. Point the remote toward the TV and test the POWER, VOLUME, and MUTE functions.
If these functions do not operate, enter the next setup code from the list and repeat this procedure from step 1.

click here for a complete listing of instructions

Setup for TV
Make sure the power to your TV is turned
on before you program the remote control.
1. Locate your TV brand and TV setup
code in the table below. If your TV
brand is not listed, see Searching the
Code Library.
2. Point the remote control away from the
DHCT, TV, and VCR.
3. On your remote control, press and hold
the TV key and the SELECT key at the
same time, until the LED on the remote
blinks twice.
4. Using the remote control keypad, enter
your TV’s 3-digit setup code. The LED
on the remote control should blink
twice. If not, try another setup code, if
available.

click here for a complete listing of instructions

Follow these steps to set up a mode key:
1. Turn on your device.
2. Press and hold the SELECT key and the
appropriate mode key for that device until
all the mode keys blink twice.
3. Enter the setup code for the device. The
mode keys blink twice to indicate that the
code was accepted.
4. Point the remote control toward the
device and press POWER, or CH+ to test the device.
5. Did the device operate correctly?
• If yes, go to step 6.
• If no, repeat steps 3 through 5 using a
different setup code.
6. Repeat steps 2 through 4 for each mode
key you want to set up.

click here for a complete listing of instructions

Programming for your TV
1) Turn on your TV.
2) Press and hold "TV" key and "DEVICE" key at the same time until the indicator is on.
3) Enter the three-digit code.
4) If your TV turns off, press the "DEVICE" key (if your TV doesnt turn off, enter the other three-digit code continuously until the TV turns off.)
5) If the programming is correct the indicator will blink twice.

click here for a complete listing of instructions

Programming for your TV
1) Turn on your TV.
2) Press and hold "TV" key and "SELECT" key at the same time until the indicator is on.
3) Enter the three-digit code.
4) If your TV turns off, press the "SELECT" key. (If your TV doesnt turn off, enter the other three-digit code continuously until the TV turns off.)
5) If the programming is correct, the indicator will blink twice.

click here for a complete listing of instructions

Setting Up Your Intuitive to Operate Your Devices
To setup your Intuitive to operate your devices:
Turn on the device (TV, VCR, cable, etc.) that you want to operate.
1. Press and hold the SETUP button until the Intuitives red light blinks twice. Release the SETUP button.
2. Enter the first 3-digit Setup Code for your brand of device. If you entered the code correctly, the Intuitives red light will blink twice.
3. Aim the Intuitive at your device and hit the device button.
4. Your device should turn off. If your device does not turn off, repeat steps 1 - 3 trying each code for you brand of device until you find the code that operates your device.

click here for a complete listing of instructions

Programming Devices
1. Turn on the equipment you wish to program. (TV, VCR, or DVD)
2. Press the [DEVICE] button (TV or VCR) to be programmed and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
4. Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.
*Note : Try all the functions on the remote control. If any of the functions do not work as they should, repeat from Step 2 using the next three-digit code number from the same brand list. Make sure that the VCR/VOD button is in the VCR position when using your VCR.

click here for a complete listing of instructions

Programming Devices
1. Turn on the equipment you wish to program. (TV, VCR, or DVD)
2. Press the [DEVICE] button (TV or VCR) to be programmed and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
4. Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the
code has been stored.

click here for a complete listing of instructions

Programming Devices
1. Turn on the equipment you wish to program. (TV, VCR, or DVD)
2. Press the [DEVICE] button (TV or VCR) to be programmed and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
4. Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the
code has been stored.

click here for a complete listing of instructions